Dr. Arshpreet Singh

Dr. Arshpreet Singh

Designation:

Assistant Professor

Specialization:

Material Deformation, Die less forming, Machining, CAD/CAM

Email:

arshpreet.singh@thapar.edu

Designation :- Assistant Professor

EDUCATION:

  • PhD in Manufacturing from Indian Institute of Technology Ropar, Punjab, 2017.
  • E. in Metallurgical Engineering, from PEC university of Technology, Chandigarh, 2011.
  • Tech in Mechanical Engineering from Punjab Technical University, Jalandhar, Punjab, 2008.
  • Diploma in Instrumentation Technology from Indo Swiss Training Centre, CSIO, Chandigarh, 2005.

EXPERIENCE:

  1. Assistant Professor, Department of Mechanical Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab (July, 2017 - present)
  2. Assistant Professor, Department of Mechanical Engineering, RBIEBT, Mohali, Punjab (July, 2011- July, 2012)
  3.  Lecturer, Department of Mechanical Engineering, RBIEBT, Mohali, Punjab (August, 2008- June,  2009)

 

JOURNAL PUBLICATIONS:

  1. Singh A, Agrawal A. (2022). Single point incremental bending: Bending load evaluations and process validation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
  2. Kumar, N., Singh, A., Agrawal, A. (2020). Formability analysis of AA1200 H14 aluminum alloy using single point incremental forming process. Transactions Indian Institute of Metals. https://doi.org/10.1007/s12666-020-02014-7.
  3. Kumar, R., Kumar, G., Singh, A. (2020). An assessment of residual stresses and micro-structure during single point incremental forming of commercially pure titanium used in biomedical applications. Materials Today: Proceedings 28; 1261–1266.
  4. Singh, A., Agarwal, A. (2018). Investigation of parametric effects on geometrical inaccuracies in deformation machining process. ASME Journal of Manufacturing Science and Engineering, 140, 074501-8.
  5. Singh, A., Agrawal, A. (2017). Experimental and numerical investigations on structural thinning, thinning evolution and compensation stratagem in deformation machining stretching mode. Journal of Manufacturing Processes 26; 216-225.
  6. Singh, A., Agrawal, A. (2017). Experimental force modeling for deformation machining stretching mode for aluminium alloys. Sadhana 42(2); 271-280.
  7. Singh, A., Agrawal, A. (2016). Investigations on structural thinning and compensation stratagem in deformation machining stretching mode. Manufacturing Letters 9; 1-6.
  8. Singh, A., Agrawal, A. (2016). Comparison of Deforming Forces, Residual Stresses and Geometrical Accuracy of Deformation Machining with Conventional Bending and Forming. Journal of Material Processing Technology 234; 259-271.
  9. Singh, A., Agrawal, A. (2015). Investigation of Surface Residual Stress Distribution in Deformation Machining Process for Aluminum Alloy. Journal of Material Processing Technology 225; 195-202.

 

CONFERENCES/SYMPOSIUMS

  1. Thakur, A., Joshi, R. S., & Singh, A. “A brief review on mechanical properties of Al-MMCs fabricated by stir casting route & applications”. In E3S Web of Conferences (Vol. 309) 2021. EDP Sciences.
  2. Kumar, R., Kumar, G., Singh A. “An Assessment of Residual Stresses and Micro-Structure during Single Point Incremental Forming of Commercially Pure Titanium Used in Biomedical Applications.“ 2nd International Conference on Recent Advances in Materials & Manufacturing Technologies, 2019, Dubai, United Arab Emirates. (Awarded best paper)
  3. Singh, A. “Re-using machining scrap: An alternative approach.” Frontiers in Green and Sustainable Energy, 2019 Toronto, Canada.
  4. Singh, A., Agrawal, A., “Insights on Force Trends and Geometrical Discrepancies in Single Point Incremental Bending Process.” 10th International Conference on Precision, Meso, Micro and Nano Engineering, December 7-9, 2017, Indian Institute of Technology Madras, Chennai, India.
  5. Singh, A., Agrawal, A., “Numerical modeling and evaluations of residual stresses, deforming forces and geometrical inaccuracies in deformation machining process.” Advances in material processing technology conference, November 8-11, 2016, KaulaLumper, Malaysia.
  6. Singh, A., Nirala, H. K., Agrawal, A., “Investigations on Structural Thinning in Deformation Machining Stretching Mode.” 19th ESAFORM Conference on Material Forming. April 27-29, 2016, Nantes, France.
  7. Singh, A., Nirala, H. K., Agrawal, A., “Metal forming research @ IIT Ropar.” International Forming Technology Exhibition (IMTEX Forming), January 21-26, 2016, Bengaluru. (Awarded first prize).
  8. Singh, A., Agrawal, A., “Experimental Investigation on Elastic Spring Back in Deformation Machining Bending Mode.” Proceedings of the 10th ASME 2015 Manufacturing Science and Engineering Conference. June 08-12, 2015, Charlotte, North Carolina, USA.
  9. Singh, A., Agrawal, A., “Deformation Machining” Poster presented in International Symposium on Digital Fabrication, March 2-3, 2015 organized by Indian Institute of Technology Hyderabad, India.
  10. Singh, A., Agrawal, A., “Comparison of Dimensional Repeatability and Accuracy for Deformation Machining Stretching Mode with Sheet Metal Components” 5th International and 26th All India Manufacturing Technology, Design and Research Conference, December 12-14, 2014 held at Indian Institute of Technology Guwahati, India.
  11. Singh, A., Agrawal, A., “Comparison of Deforming Forces for Deformation Machined Components with Conventionally Formed Components” 23rd International Conference on Processing and Fabrication of Advanced Materials, December 5-7, 2014 held at Indian Institute of Technology Roorkee, India.